Temperature and Humidity controller 2 sockets. Up to 1500watts.

Description

Presented by Mark
For your environmental pleasure.
Mark@Sporebuddies.com

Here we have a beautiful Plug and Play Temperature and Humidity controller made in house by the MushBuddies Electrical Elves.
This dual controller will allow the user to individually control a heating matt or heating tube and a humidifier just by plugging the items into the provided sockets of the controller. The temp and humidity settings will be set for you at 26-27c and 90-95%rh meaning the plug and play temp and hum controller is ready to use as soon as it arrives.
If however you would like to use different settings to the ones we have set. You can simply change the settings on the controller in the following manor:

To change the TEMPERATURE settings,
To change the HEAT TURN ON TEMP.
Press and hold down the left arrow untill the numbers on the screen start to flash. Now using the up and down arrows you will be able to change the temp to suit. This is the temperature that the heat mat will turn on at. When your happy with the temp. Leave the controller for some 5 seconds and the sensed temp will be displayed.
To change the HEAT TURN OFF TEMP.
Press and hold down the right arrow until the numbers on the screen start to flash. Now using the up and down arrows you will be able to change the temp to suit. This is the temperature that the heat mat will turn off at. When your happy with the temp. Leave the controller for some 5 seconds and the sensed temp will be displayed.

To change the HUMIDITY settings.
To change the HUMIDITY TURN ON SETTINGS.
Press and hold down the left arrow until the numbers on the screen start to flash. Now using the up and down arrows you will be able to change the humidity to suit. This is the point that the humidifier will turn on at. When your happy with the temp. Leave the controller for some 5 seconds and the sensed temp will be displayed.

To change the HEAT TURN OFF TEMP.
Press and hold down the right arrow until the numbers on the screen start to flash. Now using the up and down arrows you will be able to change the humidity to suit. This is the point that the humidifier will turn off at. When your happy with the temp. Leave the controller for some 5 seconds and the sensed temp will be displayed.

SPECIFICATION:
240v
10amp
Dual colour digital display
The main power lead is 2m.
The two socket leads are 1m each.
The combined temp and humidity probe is 1.5m.

Load output is 10am max. With most humidifiers being under 300watts, the controller will easily allow from 7watts to a 1500 watt heater if needed.
Perfect for small box projects or full room efforts.
Choose the SporeBuddies Plug and Play Temperature and Humidity controller for easy and precise control.